We design, engineer, and install commercial facades—structural glazing, curtain walls, ACP cladding, and unitized systems—balancing aesthetics, weather performance, and safety.
We design, engineer, and install commercial facades—structural glazing, curtain walls, ACP cladding, and unitized systems—balancing aesthetics, weather performance, and safety.
.png){kind=logo}
Why facade access must be designed with the facade — cradle systems, anchors, rope access and why a building nobody can reach does not get maintained.
How an existing facade is surveyed, assessed and replaced — what to investigate first, overclad versus replace, and working on an occupied building.
How structural silicone glazing works, where the load actually goes, why the bond must be factory-applied, and what maintenance a bonded facade needs.
System and custom aluminium fenestration for commercial and high-rise projects, engineered to IS 733 and ECBC 2017 fenestration U-value standards.
Entrance canopies, pergolas, skylights and balusters engineered for wind uplift and drainage — fabricated in-house and coordinated with the facade.
ACP, solid aluminium, metal, tile and stone cladding with fire-rated cores, engineered to NBC 2016 and EN 13501-1 fire safety standards.
Unitised, semi-unitised and stick curtain wall — engineered, fabricated in-house and installed to IS 875 Part 3 wind loads and ASTM E283/E331 testing.
Patch-fitted frameless glass doors and automatic sliding entrances for lobbies, showrooms and offices — engineered, supplied and installed in-house.
Aluminium, stainless, MS and structural glass railing systems engineered to IS 875 Part 2 handrail loading, with 316-grade SS for coastal exposure.
Imported ventilated envelope systems with drained cavities and cavity barriers, engineered to NBC 2016 Part 4 fire and ECBC 2017 envelope standards.
Point-fixed spider glazing with routels, glass fins and tie rods for atria, lobbies and showrooms — engineered, fabricated in-house and installed.
Imported high-performance wall and roof insulation, PIR and rock wool panels for industrial and commercial envelopes, specified to ECBC 2017 U-values.
Background reading on the decisions this service involves — written from what goes wrong on site, with the standards named on the page.
How a commercial facade is engineered — loads, system selection, thermal and water performance, testing, interfaces and installation — and where envelopes fail.
GuideHow to select glass for a commercial building in India — SHGC, U-value, light transmission, safety types, acoustics and the trade-offs between them.
ComparisonDouble-glazed units against single glazing on Indian commercial facades: heat gain, cooling load, condensation, acoustics, weight and what ECBC expects.
ComparisonExtruded terracotta baguettes and panels against large-format porcelain on Indian facades: panel size, weight, fixing, water absorption, breakage, replacement.
ComparisonAluminium composite panel against high-pressure laminate for Indian facades: core types and fire classification, flatness, fixing, weathering and replacement.
A curtain wall is the non-load-bearing outer skin of a building, hung from the structure floor by floor. Structural glazing is one way of fixing the glass within it: the glass is bonded to the frame with structural silicone so no metal cap shows on the outside. A curtain wall can be structurally glazed, capped, or a mix of the two.
Unitized panels are assembled and glazed in a factory and installed floor by floor, which gives better quality control and faster enclosure, and suits taller buildings and repetitive facades. Stick-built systems are assembled piece by piece on site, which suits smaller or irregular facades. Our unitized vs stick-built comparison sets out the trade-offs in detail.
Unitized vs stick-built curtain wallThe design wind pressure is worked out for the specific building from IS 875 (Part 3), using its location, height, terrain and shape, with higher pressures at corners and edges. Frames, glass, brackets and anchors are then checked against that pressure. The value is specific to each building, so it cannot be taken from another project.
Shop drawings translate the architect's design into what will actually be fabricated: every profile, joint, bracket, anchor and sealant line. They are where the facade is coordinated with the structure's tolerances and the building services, and approving them is the last point where changes are cheap. Our facade deliverables include design, engineering and shop drawings.
Typically water tightness checks on installed sections, sealant adhesion checks, and inspection of anchors and brackets before they are covered. Larger projects may also specify a performance mock-up tested for air, water and structural behaviour before production. What is tested should be written into the specification so it happens before handover.
We supply and install commercial-grade aluminium doors and windows—sliding, casement, and openable systems—engineered for durability, acoustics, and clean finishes.
We manage commercial construction with EPC planning, procurement, and site execution for reliable project delivery.
We deliver turnkey office design & build solutions—strategy, space planning, interiors, and execution—so teams move into fully operational workspaces faster.
Talk to our specialists for a tailored design, MEP, or fit-out roadmap.
Tell us what you are planning. Message our team on WhatsApp, call us, or leave your number and we will call you back.